Portal Home > Knowledgebase > Articles Database > Cisco routing question
Posted by recklessop, 07-27-2007, 01:34 PM I am setting up a small ccna lab and i have RIP working and i can ping my lan from both routers, but only particular hosts on the lan from the one router the setup is LAN (192.168.1.0/255.255.255.0) | \/ router 1 E0 192.168.1.45 Serial0 10.10.10.1 | \/ Serial0 10.10.10.2 (of router2) | \/ E0 192.168.3.250 E1 192.168.2.250 Lo 192.168.5.4 I can ping 192.168.1.102 from router 2 and 192.168.1.45 but no not 192.168.1.201 ... or 192.168.1.1 any ideas? also i can ping 192.168.5.4 from 192.168.1.102 which is a linux box and an ip route to tell it that 192.168.5.0 can be gotten from 192.168.1.45
Add to Favourites 
Print this Article
